Saitek 2500 profile

[iceblader24]

Yo, I've got a Saitek 2500, and I was wondering if anyone can send me a good working profile for the controller so I can have better control over the game in MVP 2005. Thanks a lot.

[FryGuy]

profile= Cyborg_Force_Rumble_Pad

device= Cyborg_Force_Rumble_Pad

player= 2

number_of_buttons= 12

number_of_povs= 1

number_of_axis= 4

VPAD_VIRTUAL_BUTTON_START= button 11

VPAD_VIRTUAL_BUTTON_SELECT= not_assigned -1

VPAD_VIRTUAL_BUTTON_CROSS= button 3

VPAD_VIRTUAL_BUTTON_CIRCLE= button 4

VPAD_VIRTUAL_BUTTON_SQUARE= button 1

VPAD_VIRTUAL_BUTTON_TRIANGLE= button 2

VPAD_VIRTUAL_BUTTON_L1= button 7

VPAD_VIRTUAL_BUTTON_R1= button 8

VPAD_VIRTUAL_BUTTON_L2= button 5

VPAD_VIRTUAL_BUTTON_R2= button 6

VPAD_VIRTUAL_BUTTON_L3= button 9

VPAD_VIRTUAL_BUTTON_R3= button 10

VPAD_VIRTUAL_BUTTON_DPAD_UP= pov0 1

VPAD_VIRTUAL_BUTTON_DPAD_DOWN= pov180 1

VPAD_VIRTUAL_BUTTON_DPAD_LEFT= pov270 1

VPAD_VIRTUAL_BUTTON_DPAD_RIGHT= pov90 1

VPAD_VIRTUAL_BUTTON_L_STICK_RIGHT= axis- 1

VPAD_VIRTUAL_BUTTON_L_STICK_LEFT= axis+ 1

VPAD_VIRTUAL_BUTTON_L_STICK_UP= axis+ 2

VPAD_VIRTUAL_BUTTON_L_STICK_DOWN= axis- 2

VPAD_VIRTUAL_BUTTON_R_STICK_RIGHT= axis- 3

VPAD_VIRTUAL_BUTTON_R_STICK_LEFT= axis+ 3

VPAD_VIRTUAL_BUTTON_R_STICK_UP= axis+ 4

VPAD_VIRTUAL_BUTTON_R_STICK_DOWN= axis- 4

VPAD_PITCH_1= button 3

VPAD_PITCH_2= button 4

VPAD_PITCH_3= button 1

VPAD_PITCH_4= button 2

VPAD_PITCH_5= button 8

VPAD_FIELD_PICK_OFF_THROW_FIRST= button 4

VPAD_FIELD_PICK_OFF_THROW_SECOND= button 2

VPAD_FIELD_PICK_OFF_THROW_THIRD= button 1

VPAD_PITCH_OUT= button 3

VPAD_THROW_BALL= not_assigned -1

VPAD_INTENTIONAL_WALK= button 10

VPAD_INTENTIONAL_HITBATTER= button 9

VPAD_PITCH_HISTORY_OPEN= button 9

VPAD_SWING_NORMAL= button 3

VPAD_SWING_BUNT= button 10

VPAD_CHARGE_MOUND= button 2

VPAD_FIELD_THROW_FIRST= button 4

VPAD_FIELD_THROW_SECOND= button 2

VPAD_FIELD_THROW_THIRD= button 1

VPAD_FIELD_THROW_HOME= button 3

VPAD_FIELD_SWITCH= button 8

VPAD_FIELD_RELAY_THROW= button 7

VPAD_FIELD_CUTOFF_THROW= button 6

VPAD_FIELD_FAKE_RUNDOWN_THROW= button 7

VPAD_RUNNER_FIRST_SELECT= button 4

VPAD_RUNNER_SECOND_SELECT= button 2

VPAD_RUNNER_THIRD_SELECT= button 1

VPAD_RUNNER_RUNFIRST= pov90 1

VPAD_RUNNER_RUNSECOND= pov0 1

VPAD_RUNNER_RUNTHIRD= pov270 1

VPAD_RUNNER_RUNHOME2SCORE= pov180 1

VPAD_BASERUNNER_ADVANCEALL= button 7

VPAD_BASERUNNER_RETREATALL= button 8

[RAM]

yo try the appropriate forum.

[big shmooz]

My advice is to change at least two lines in that profile.

Change this... player= 2 to this... player= 0

Change this...VPAD_PITCH_HISTORY_OPEN= button 9 to this.... VPAD_PITCH_HISTORY_OPEN= button 11

Personally I would also change this... VPAD_FIELD_CUTOFF_THROW= button 6 to this... VPAD_FIELD_CUTOFF_THROW= button 7 but that's merely a preference.

Others have recommended that these lines also be changed... (I personally changed them also)... VPAD_VIRTUAL_BUTTON_R_STICK_RIGHT= axis- 3

VPAD_VIRTUAL_BUTTON_R_STICK_LEFT= axis+ 3

VPAD_VIRTUAL_BUTTON_R_STICK_UP= axis+ 4

VPAD_VIRTUAL_BUTTON_R_STICK_DOWN= axis- 4

The change here to be done is... to change the 3's to 4's & the 4's to 3's.

I also flipped the last 2 lines so it looks like this

VPAD_BASERUNNER_ADVANCEALL= button 8

VPAD_BASERUNNER_RETREATALL= button 7

instead of this...

VPAD_BASERUNNER_ADVANCEALL= button 7

VPAD_BASERUNNER_RETREATALL= button 8.

But again, this is personal preference.

Also note, you MUST change player = 2 to 0 Otherwise the profile will not work properly unless you have multiple gamepads you are using. (& even then, the profile will only work on your THIRD "active" gamepad) (remember that MVP disables all unsupported gamepads, so even if you have multiple gamepads connected, the profile will not recognize them as gamepads unless the game itself supports it)