dgutierrez32 Posted February 13, 2007 Share Posted February 13, 2007 Followed the instructions, and everything works fine. One question: Is there a way to change the pickoff from the normal one to the quick one? I was pretty bad at pickoffs on the xbox, but with this config it's impossible to pick someone off. Quote Link to comment Share on other sites More sharing options...
hoosier4974 Posted February 19, 2007 Share Posted February 19, 2007 New version has been at TC for a while, here is a link http://forums.total-classics.com/viewtopic.php?t=20 I can't get this link to work. Keeps coming up with an Error or says URL can't be found. I'd like to be able to use my 360 controller for this game. Is it possible that someone could upload their controller.cfg file ??? Or, maybe post the exact text that I need to add to this file and tell me exactly where to add it within the body of existing text??? FYI, I already have the MS file necessary to use the 360 controller (have used it for playing Madden 07). Thanks in advance !!! Quote Link to comment Share on other sites More sharing options...
hoosier4974 Posted February 19, 2007 Share Posted February 19, 2007 I can't get this link to work. Keeps coming up with an Error or says URL can't be found. I'd like to be able to use my 360 controller for this game. Is it possible that someone could upload their controller.cfg file ??? Or, maybe post the exact text that I need to add to this file and tell me exactly where to add it within the body of existing text??? FYI, I already have the MS file necessary to use the 360 controller (have used it for playing Madden 07). Thanks in advance !!! UPDATE: For the most part, I've got the controller working but there are still a few things that I can't figure out how to do. I followed Kraws instructions (finally found it on EAMods.com) and even downloaded the MVP profile shown. Here's my problem: 1) Can't get the batter to move in the battters box 2) Can only do the slow "safe" pickoff throw Does anybody know how to correct these ?? Thanks Quote Link to comment Share on other sites More sharing options...
dgutierrez32 Posted February 19, 2007 Share Posted February 19, 2007 1. I'm not at my home PC so I can't confirm, but I'm pretty sure it's done by holding down the left trigger and moving analog stick. 2. I asked the same question 2 posts up, so I'm also waiting for a response in regards to this issue. Quote Link to comment Share on other sites More sharing options...
MaCar91 Posted February 23, 2007 Share Posted February 23, 2007 Does anyone have an idea of how i can get my wireless controller working? I bought the Wireless adapter and the controller is recognized, but I can't seem to figure it out. Quote Link to comment Share on other sites More sharing options...
MillerTyme Posted February 24, 2007 Share Posted February 24, 2007 i got the xbcd drivers working and i downloaded the profile for mvp i found at eamods, now i have a few things not working. I cannot get the intentional walk/hit batter to work at all, i tried assigning them to the top bumpers respectively. It has been awhile since i played mvp, am i supposed to do anything besides press them b/c nothing is happening when i press them. Quote Link to comment Share on other sites More sharing options...
Darkslide820 Posted March 1, 2007 Share Posted March 1, 2007 I tried clicking on the links at the beginning of the thread and they either didn't work or it said the dowload wasn't available anymore. Suggestions? Quote Link to comment Share on other sites More sharing options...
Stotic Posted March 4, 2007 Share Posted March 4, 2007 Does anyone have the link for the xbox 360 controller? When I connect it to my laptop, windows update cannot find anything and I have to physically locate the file somewhere on microsoft.com. After I run this .exe, and go through all the steps I cannot locate the controller in the device manager, but I do see a question mark next to Other Devices and a subdevice with question mark called USB Device. What do you think is wrong? Quote Link to comment Share on other sites More sharing options...
ToiletofSadness Posted March 5, 2007 Share Posted March 5, 2007 I tried clicking on the links at the beginning of the thread and they either didn't work or it said the dowload wasn't available anymore. Suggestions?Driver link Kraw's instructions, courtesy of EA Mods Don't use the download links for the XBCD drivers from his instructions thread. My link has both the XBCD config util and the 360 controller drivers in one installer. Quote Link to comment Share on other sites More sharing options...
Darkslide820 Posted March 5, 2007 Share Posted March 5, 2007 So you want me to download the ... um, download that starts once you click on the top link, and only use the second link to read the step by step instructions, but not download anything from the second link, correct? Do I load up that CD that comes with the XB360 Controller at all, or do I just use the download that you gave me the link for? Thanks. Quote Link to comment Share on other sites More sharing options...
Stotic Posted March 5, 2007 Share Posted March 5, 2007 I can't get the controller to appear in the Device Manager. Does this happen after you install the microsoft ones or the xbcd ones? It didn't appear in there after either and only comes up as a Question Mark like I previously stated. If it is the Microsoft drivers could someone provide me with a link at where to get correct ones? Quote Link to comment Share on other sites More sharing options...
ToiletofSadness Posted March 5, 2007 Share Posted March 5, 2007 So you want me to download the ... um, download that starts once you click on the top link, and only use the second link to read the step by step instructions, but not download anything from the second link, correct?Yes, that is correct. Do I load up that CD that comes with the XB360 Controller at all, or do I just use the download that you gave me the link for? Thanks.No, the drivers on that CD are unnecessary. Quote Link to comment Share on other sites More sharing options...
ToiletofSadness Posted March 5, 2007 Share Posted March 5, 2007 I can't get the controller to appear in the Device Manager. Does this happen after you install the microsoft ones or the xbcd ones? It didn't appear in there after either and only comes up as a Question Mark like I previously stated. If it is the Microsoft drivers could someone provide me with a link at where to get correct ones?You should see a controller no matter which one you installed. Did you install the drivers with the controller unplugged? That said, the XBCD ones are preferred since they give you more options for configuration. Quote Link to comment Share on other sites More sharing options...
Darkslide820 Posted March 5, 2007 Share Posted March 5, 2007 OK, got a few more questions for ya since I don't want to screw things up when I try this: 1) Should I double click on that XBCD XP file (the one you linked me to earlier) before I plug the controller into the USB port, or while I have the controller plugged in? 2) Will using the file you gave me affect my game play at all during other games, say, like Halo PC, that I have used it for before and it worked well? 3) Again using the file you linked me to and no other, can I use the controller "like a mouse" for in game menu browsing, as I have seen several other ask about here? Thanks again Quote Link to comment Share on other sites More sharing options...
Stotic Posted March 5, 2007 Share Posted March 5, 2007 You should see a controller no matter which one you installed. Did you install the drivers with the controller unplugged? That said, the XBCD ones are preferred since they give you more options for configuration. That's not the case here (I installed with controller plugged in) Quote Link to comment Share on other sites More sharing options...
Darkslide820 Posted March 5, 2007 Share Posted March 5, 2007 Haha. I'm in the background of your pic! Quote Link to comment Share on other sites More sharing options...
ToiletofSadness Posted March 6, 2007 Share Posted March 6, 2007 OK, got a few more questions for ya since I don't want to screw things up when I try this: 1) Should I double click on that XBCD XP file (the one you linked me to earlier) before I plug the controller into the USB port, or while I have the controller plugged in? 2) Will using the file you gave me affect my game play at all during other games, say, like Halo PC, that I have used it for before and it worked well? 3) Again using the file you linked me to and no other, can I use the controller "like a mouse" for in game menu browsing, as I have seen several other ask about here? Thanks again1.That's the way I installed. It probably doesn't matter, but I've seen some computers screw things up if you don't install the drivers before plugging things in. 2.It'll affect other games, if you have previously configured them to use the gamepad using the Microsoft drivers. 3. The XBCD driver applet doesn't have the ability to do this (that I know of). You probably need another application to configure that and I don't know the name of it offhand. Quote Link to comment Share on other sites More sharing options...
ToiletofSadness Posted March 6, 2007 Share Posted March 6, 2007 That's not the case here (I installed with controller plugged in)Which, if any drivers, have you installed? Quote Link to comment Share on other sites More sharing options...
Stotic Posted March 6, 2007 Share Posted March 6, 2007 microsoft drivers off of microsoft.com, then the XBCD XP drivers. Quote Link to comment Share on other sites More sharing options...
ToiletofSadness Posted March 6, 2007 Share Posted March 6, 2007 Alright, go to Control Panel->Add/Remove Hardware. Opt not to use Windows Update. Choose the driver to install. Choose the pick from a list option and track down the XBCD controller driver. Quote Link to comment Share on other sites More sharing options...
Darkslide820 Posted March 6, 2007 Share Posted March 6, 2007 2.It'll affect other games, if you have previously configured them to use the gamepad using the Microsoft drivers. But if I use your driver AND THEN try to use it to play Halo PC it should work like normal? And what's the point of this extra driver anyways? The controller doesn't work for MVP 2005 without it? Quote Link to comment Share on other sites More sharing options...
Stotic Posted March 6, 2007 Share Posted March 6, 2007 I assume you meant "Don't search I will choose the driver to install" when you said pick from a list option. After that I select the hardware type as "sound, video, and game controllers" then click next. It lists several vendors, none of which are xbox or microsoft. Quote Link to comment Share on other sites More sharing options...
ToiletofSadness Posted March 6, 2007 Share Posted March 6, 2007 But if I use your driver AND THEN try to use it to play Halo PC it should work like normal?You'll probably have to remap the controls (if you use the gamepad). And what's the point of this extra driver anyways? The controller doesn't work for MVP 2005 without it?the biggest benefits are being able to configure the triggers as independent buttons instead of parts of a single axis and the added rumble support. MVP works with the default MS drivers, but it works better with the XBCD drivers. Quote Link to comment Share on other sites More sharing options...
ToiletofSadness Posted March 6, 2007 Share Posted March 6, 2007 I assume you meant "Don't search I will choose the driver to install" when you said pick from a list option. After that I select the hardware type as "sound, video, and game controllers" then click next. It lists several vendors, none of which are xbox or microsoft.The XBCD driver should be listed as a "Human Interface Device". One other thing, have you tried configuring your gamepad on another machine? Quote Link to comment Share on other sites More sharing options...
Stotic Posted March 6, 2007 Share Posted March 6, 2007 When I choose Human Interface Device I have a large choice of vendors to choose from. There's nothing xbox related under Microsoft and I cannot find anything XBCD related. I have no other machines to test this on currently unfortunately. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.