Need help--Adjusting batting views

[tks]

There is a batting view that I really like but I'm having trouble replicating it in various datafiles....The view I'm trying to reproduce is "battingview 2" which is part of Rodatas version2 datafile and Big Schmooz06 recent datafile.

Here are examples of the values I used to reproduce BV2. (These were taken directly from Big Schmooz's datafile....

0xecdfce4b 103<BattingView2RightLow>;0 1;1 1;2 0;3 1;4 1;5 0;6 1;7 ;8 ;9 ;10 ;11 None;12 ;13 bpposAway1;14 0;15 -200;16 26;17 -200;18 X#Y#Z;19 X#Y#Z;20 X#Y#Z;21 0.950;22 0.500;23 ;24 ;25 None;26 Waist;27 ;28 bpposAway1;29 0.000;30 0.000;31 0.000;32 ;33 None;34 Waist;35 0.00;36 ;37 0;38 0.00;39 0.00;40 ;41 0.03;42 0.787;43 0.000;44 0;45 Pitch#Heading#Roll;46 Pitch#Heading#Roll;47 ;48 0.950;49 0.950;50 0.950;51 0.950;52 ;53 26.4;54 0;55 0;56 1.00;57 72.00;58 0.000;59 FOV;60 FOV;61 ;62 0;63 Actor1;64 0;65 1.000;66 0;67 0;68 1.000;69 0;70 ;71 0;72 0.500;73 0.500;74 ;75 0;81 0.00;82 0.00;83 ;84 ;85 ;86 Absolute;87 Absolute;88 ;89

0x1e7362ca 108<BattingView2RightHi>;0 0;1 1;2 1;3 1;4 1;5 0;6 1;7 ;8 ;9 ;10 ;11 None;12 ;13 bpposAway1;14 0;15 -200;16 26;17 -200;18 X#Y#Z;19 X#Y#Z;20 X#Y#Z;21 0.950;22 0.500;23 ;24 ;25 None;26 Waist;27 ;28 bpposAway1;29 0.000;30 0.000;31 0.000;32 ;33 None;34 Waist;35 0.00;36 ;37 0;38 0.00;39 0.00;40 ;41 0.03;42 0.787;43 0.000;44 0;45 Pitch#Heading#Roll;46 Pitch#Heading#Roll;47 ;48 0.950;49 0.950;50 0.950;51 0.950;52 ;53 26.4;54 0;55 0;56 1.00;57 72.00;58 0.000;59 FOV;60 FOV;61 ;62 0;63 Actor1;64 0;65 1.000;66 0;67 0;68 1.000;69 0;70 ;71 0;72 0.500;73 0.500;74 ;75 0;76 ;77 Default;78 8.0;79 1.000;80 0;81 0.00;82 0.00;83 ;84 ;85 ;86 Absolute;87 Absolute;88 ;89

(For brevity I didn't post the similar values for LeftLow and LeftHi.)

However, when I go to use these values in another datafile, everything looks as it should except home plate is off center.

The height appears correct as does the distance from the plate but when hitting right-handed, the plate is to the far right of the screen and when hitting left, the plate is to the far left of the screen....Home plate is not centered.

I only concentrated on values 0 through 89 in BattingView2 for both right and left handed....There obviously must be another value(s) that I over-looked but I sure don't know what they are.

I don't know enough about creating datafiles to know where else to look to get the plate centered on the screen.

Sorry this is so lengthy but I wanted to provide all the information I could....I'm 99% there but that 1% makes it almost impossible to use....Sure could use some help on this one.

[tks]

If anyone was planning on responding....Don't!

I figured out the cause....Hard to believe but it was an error I made. :roll: