Jump to content

Need Default Outfield Depths...


m4g1c

Recommended Posts

Yeah I noticed the outfielders play pretty far back and I don't think that made it any more realistic. I hit sure gappers for doubles and they get to them and hold me to a single if it's not someone like Carl Crawford running the bases. And a lot of bloop hits I have now fall in for doubles when they should be singles or possibly even outs. So I would like to know, what are the default outfielder depths in the datafile.txt? Here is a quote from another thread:

If you are adept at editing the datafile, the outfielder depth is pretty easy to fix.

Here's the section in question:

0xeab27fc1 9 12;2 LeftAngleDeg;1 LeftDepth%;6 RightField;7 RightDepth%;0 LeftField;3 CenterField;8 RightAngleDeg;4 CenterDepth%;5 CenterAngleDeg;


0x88da6eac 9<of_outfieldin>;0;1 28.1;2 11.6;3;4 36.8;5 46.8;6;7 33.9;8 76.3;


0x8a2ab989 9<of_sacbunt>;0;1 57.7;2 14.9;3;4 55.5;5 45.0;6;7 62.5;8 73.6;


0xe02ad8cc 9<of_slaphitter_lh>;0;1 55.0;2 10.0;3;4 58.2;5 39.0;6;7 65.2;8 68.2;


0xe02ad992 9<of_slaphitter_rh>;0;1 65.2;2 21.8;3;4 58.2;5 51.0;6;7 55.0;8 80.0;


0xe897625d 9<of_standard_lh>;0;1 75.0;2 19.0;3;4 75.0;5 49.0;6;7 78.5;8 78.0;


0xe8976323 9<of_standard_rh>;0;1 78.5;2 13.0;3;4 75.0;5 41.0;6;7 75;8 71.0;


0x484e4e24 9<of_extremeshift_lh>;0;1 75.0;2 22;3;4 75.0;5 57.5;6;7 78.5;8 83.5;


0x484e4eea 9<of_extremeshift_rh>;0;1 78.5;2 6.6;3;4 75.0;5 32.5;6;7 75.0;8 68.0;


0x556d89f9 9<of_pullhitter_lh>;0;1 75.0;2 19.0;3;4 75.0;5 53.0;6;7 78.5;8 81.0;


0x556d8abf 9<of_pullhitter_rh>;0;1 78.5;2 9.0;3;4 75.0;5 37.0;6;7 75.0;8 71.0;


0x7518b3fb 9<of_spray_lh>;0;1 75.0;2 16;3;4 75.0;5 46;6;7 78.5;8 75;


0x7518b4c1 9<of_spray_rh>;0;1 78.5;2 15;3;4 65.0;5 44;6;7 75;8 75;

You want to be changing the values at 1 (LF), 7(RF), and 4(CF), they are percentages of the total distance to the wall which allows for variances in park dimensions.

So, as you can see, in a standard set up for a LH batter the LF is at 75%, the RF is at 75% and the CF is at 78%. I'm pretty sure these numbers are from one of my mods where I had moved them all back 5%...adjust as you see fit.

So, would I be changing these values: (1 LeftDepth%, 7 RightDepth%, 4 CenterDepth%)? And if so, what numbers would I change each of them to to make them default?

Link to comment
Share on other sites

I felt the exact same way, so I changed them to what I felt was appropriate.

0x88da6eac 9<of_outfieldin>;0;1 28.1;2 11.6;3;4 36.8;5 46.8;6;7 33.9;8 76.3;


0x8a2ab989 9<of_sacbunt>;0;1 47.7;2 14.9;3;4 45.5;5 45.0;6;7 52.5;8 73.6;


0xe02ad8cc 9<of_slaphitter_lh>;0;1 68.0;2 10.0;3;4 68.2;5 39.0;6;7 68.2;8 68.2;


0xe02ad992 9<of_slaphitter_rh>;0;1 68.2;2 21.8;3;4 68.2;5 51.0;6;7 68.0;8 80.0;


0xe897625d 9<of_standard_lh>;0;1 68.0;2 19.0;3;4 68.0;5 49.0;6;7 68.5;8 78.0;


0xe8976323 9<of_standard_rh>;0;1 68.5;2 13.0;3;4 70.0;5 41.0;6;7 68.0;8 71.0;


0x484e4e24 9<of_extremeshift_lh>;0;1 68.0;2 22;3;4 68.0;5 57.5;6;7 68.5;8 83.5;


0x484e4eea 9<of_extremeshift_rh>;0;1 68.5;2 6.6;3;4 69.0;5 32.5;6;7 68.0;8 68.0;


0x556d89f9 9<of_pullhitter_lh>;0;1 68.0;2 19.0;3;4 68.0;5 53.0;6;7 69.5;8 81.0;


0x556d8abf 9<of_pullhitter_rh>;0;1 68.5;2 9.0;3;4 68.0;5 37.0;6;7 68.0;8 71.0;


0x7518b3fb 9<of_spray_lh>;0;1 68.0;2 16;3;4 68.0;5 46;6;7 68.5;8 75;


0x7518b4c1 9<of_spray_rh>;0;1 68.5;2 15;3;4 68.0;5 44;6;7 68;8 75;

I don't know how close they are to default, but they suit me well.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...