blindguy Posted April 18, 2016 Share Posted April 18, 2016 Wondering if it is possible to change the infield in Rogers Center to a dirt infield with the reditor tool Quote Link to comment Share on other sites More sharing options...
raidersbball20 Posted April 19, 2016 Share Posted April 19, 2016 1 hour ago, blindguy said: Wondering if it is possible to change the infield in Rogers Center to a dirt infield with the reditor tool Not reditor. Should be possible with either redMC or KCs texture editor. Not sure which dds file it is. Quote Link to comment Share on other sites More sharing options...
WithAuthority Posted December 13, 2016 Share Posted December 13, 2016 RedMC supports MLB 2k12? I didnt think that was true Quote Link to comment Share on other sites More sharing options...
raidersbball20 Posted April 26, 2018 Share Posted April 26, 2018 @blindguySo basically with Rogers Centre its kind of a mess. I can import Tampa's field into it for the dirt infield but then you end up with black areas since the stadium structures are different sizes. You also need to start with a vanilla file so I'm thinking the ads need to be completely re-done if that's even possible. Quote Link to comment Share on other sites More sharing options...
Kccitystar Posted April 26, 2018 Share Posted April 26, 2018 This *may* be possible to do, but I'm not confident enough to give it a shot. Quote Link to comment Share on other sites More sharing options...
tinpanalley Posted April 26, 2018 Share Posted April 26, 2018 I actually wouldn't care about those black areas. Would be great to see the Rogers Centre with the correct infield. Not to change the subject but is the dirt infield doable in MVP? Quote Link to comment Share on other sites More sharing options...
blindguy Posted April 26, 2018 Author Share Posted April 26, 2018 16 hours ago, raidersbball20 said: @blindguySo basically with Rogers Centre its kind of a mess. I can import Tampa's field into it for the dirt infield but then you end up with black areas since the stadium structures are different sizes. You also need to start with a vanilla file so I'm thinking the ads need to be completely re-done if that's even possible. wow that's great work I had given up hope ,just goes to prove if you give it time almost anything can be done Quote Link to comment Share on other sites More sharing options...
raidersbball20 Posted April 27, 2018 Share Posted April 27, 2018 9 hours ago, Kccitystar said: This *may* be possible to do, but I'm not confident enough to give it a shot. Oh I have confidence in you although the obvious limitation is the inability to adequately import field data with RedMC Quote Link to comment Share on other sites More sharing options...
Kccitystar Posted April 27, 2018 Share Posted April 27, 2018 8 hours ago, raidersbball20 said: Oh I have confidence in you although the obvious limitation is the inability to adequately import field data with RedMC After making those changes to Rogers Centre, is the file still editable using the 3DM Mod Tool? I know you can tinker with the field textures and the file would still be editable in RedMC, but I'm not too sure In my head, I'm thinking you can load both n2km models and just expand the outer points of the Trop's field model to match the field dimensions of the OG Rogers Centre field model so at least the field is intact. I mean I'm loaded up on coffee so the gears are turning here, but that's what I'm going to tinker with tonight to see if it's possible, unless this can be tested before I get a chance to do so. Quote Link to comment Share on other sites More sharing options...
MarkusBroede Posted April 27, 2018 Share Posted April 27, 2018 Ich muss jetzt leider auf deutsch schreiben, da ich nicht gut englisch kann. Ich fände es cool wenn es einer hinbekommen würde das Dirt-Infield im Rogers Centre einzufügen Quote Link to comment Share on other sites More sharing options...
Kccitystar Posted April 27, 2018 Share Posted April 27, 2018 28 minutes ago, MarkusBroede said: Ich muss jetzt leider auf deutsch schreiben, da ich nicht gut englisch kann. Ich fände es cool wenn es einer hinbekommen würde das Dirt-Infield im Rogers Centre einzufügen Ich freue mich darauf, an diesem Wochenende zu arbeiten Quote Link to comment Share on other sites More sharing options...
tomba Posted April 27, 2018 Share Posted April 27, 2018 DAS BOOT Quote Link to comment Share on other sites More sharing options...
MarkusBroede Posted April 27, 2018 Share Posted April 27, 2018 Danke KC ..... mir kribbelt es in den Fingern Quote Link to comment Share on other sites More sharing options...
Kccitystar Posted April 28, 2018 Share Posted April 28, 2018 I thought it could be done, but the game won't let me export the field model for editing with none of the tools. Quote Link to comment Share on other sites More sharing options...
Smuggly Posted April 28, 2018 Share Posted April 28, 2018 I changed a stadium for the dbacks and had to also change the stadium intervals to have it look right in the game i change the names of the stadium and stadium intervals to the dback names and it worked Quote Link to comment Share on other sites More sharing options...
DaSteelerz Posted April 29, 2018 Share Posted April 29, 2018 The key is likely in the binary... not fault of the program. REDMC actually does support this. Like with SunTrust, if you change the models etc or dimensions of the stadium in any way you have to export the new binary value and then import the change. Ads could be exported and re-added to the file in the end. I have some of this archived somewhere and I'll see if I can dig it up. A little foggy right now as far as the details. Quote Link to comment Share on other sites More sharing options...
tomba Posted April 29, 2018 Share Posted April 29, 2018 22 minutes ago, DaSteelerz said: The key is likely in the binary... not fault of the program. REDMC actually does support this. Like with SunTrust, if you change the models etc or dimensions of the stadium in any way you have to export the new binary value and then import the change. Ads could be exported and re-added to the file in the end. I have some of this archived somewhere and I'll see if I can dig it up. A little foggy right now as far as the details. you made so many great stadiums Not sure if this is a sore topic but you had more previews of stadiums in the now locked mlb 2k17 thread that i would have loved to have seen the light of day redmc is now defunct cant get it licensed anymore to work on existing stadiums Quote Link to comment Share on other sites More sharing options...
Bostonnico Posted April 29, 2018 Share Posted April 29, 2018 @DaSteelerz @Kccitystar I know you can do that, with the Toronto stadium. a long time ago I expected someone to come to make that change in the stadium, from now I wish you good luck and thank you in advance for your time and effort. Cheer Up friends, greetings Quote Link to comment Share on other sites More sharing options...
Kccitystar Posted April 30, 2018 Share Posted April 30, 2018 On 4/28/2018 at 8:57 PM, DaSteelerz said: The key is likely in the binary... not fault of the program. REDMC actually does support this. Like with SunTrust, if you change the models etc or dimensions of the stadium in any way you have to export the new binary value and then import the change. Ads could be exported and re-added to the file in the end. I have some of this archived somewhere and I'll see if I can dig it up. A little foggy right now as far as the details. Red MC supports anything that has previously been modified, but when it comes to modifying something, like a previously modded file within RED MC, you need a stock file for that. Quote Link to comment Share on other sites More sharing options...
ming Posted May 1, 2018 Share Posted May 1, 2018 Really cool that this is still being explored by the top modders around here...thanks for all you guys do and good luck to you guys on RC. BTW Markus, I cant get your latest version to open after DL, any tips or perhaps the file is corrupted? Also, I loved Roy Sheider's character Markus Brody. Nice! Quote Link to comment Share on other sites More sharing options...
MarkusBroede Posted May 1, 2018 Share Posted May 1, 2018 i had uploaded the stadium once more ...... I´m German, thats my real name^^ Quote Link to comment Share on other sites More sharing options...
ming Posted May 1, 2018 Share Posted May 1, 2018 12 hours ago, MarkusBroede said: i had uploaded the stadium once more ...... I´m German, thats my real name^^ Thanks! Your the REAL MarkusBroede! I'm still having problems getting it to open...using winzip. Obviously others are getting it to work, but I downloaded a different stadium and it worked fine. Should I be using a different tool? Quote Link to comment Share on other sites More sharing options...
DaSteelerz Posted May 2, 2018 Share Posted May 2, 2018 On 4/29/2018 at 9:36 PM, Kccitystar said: Red MC supports anything that has previously been modified, but when it comes to modifying something, like a previously modded file within RED MC, you need a stock file for that. True, but everything can be re-imported after getting that fresh file... you just have to import textures last.. and update the binaries so they fit. Quote Link to comment Share on other sites More sharing options...
MarkusBroede Posted May 2, 2018 Share Posted May 2, 2018 Use WinRar.....ming Quote Link to comment Share on other sites More sharing options...
ming Posted May 3, 2018 Share Posted May 3, 2018 5 hours ago, MarkusBroede said: Use WinRar.....ming Ah...my WinRAR version was very old and an updated version did the trick. Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.