saitek 880 - right analog/ movebatter w/ runner on

[franco74]

I have searched this topic and still cant fix my problem...

I have the classic right analog controller problem...

I've changed the control. config in my documents to read this ;

VPAD_VIRTUAL_BUTTON_R_STICK_RIGHT= axis- 4

VPAD_VIRTUAL_BUTTON_R_STICK_LEFT= axis+ 4

VPAD_VIRTUAL_BUTTON_R_STICK_UP= axis+ 3

VPAD_VIRTUAL_BUTTON_R_STICK_DOWN= axis- 3

I have pasted whole configs that I found on this site

it still is inaccurate - what am I doing wrong -

also when there are men on base it is impossible to move the batter without sending runners -

perhaps someone who has solved these problems can kindly email me or post his settings;

franco1974@cox.net

thanks for your time

I am using xp drivers

[Treeroot]

I believe if you reverse the 4's and the 3's in the above config file the right analog stick will work properly. Not sure how to move the batter in the box.

[franco74]

Ok so

the numbers I posted above are the correct fix - for some reason when I cut and paste earlier it didn't work - I started with a fresh config file then just changed the numbers instead of cut and pasting the whole file and it works perfectly...

now I just need to figure out how to move the batter with runners on base - for the button which does so also advances runners

[AcousticNut]

I use the Saitek P880 and the button to move your batter in the box is the 5 button (not 7 or top/left as it is with other controllers).

Press 5 and use your left analog stick and your batter should move around in the box.

[hefalumps]

I use the Saitek P880 and the button to move your batter in the box is the 5 button (not 7 or top/left as it is with other controllers).

Press 5 and use your left analog stick and your batter should move around in the box.

I concur with Acoustic... I have the P880 and did exactly as he said and it worked. Make sure you hold down button 5 and use the LEFT analog stick to move the batter.