Gordo

2 different sizes.  Install as a shortcut for Windows as you would any shortcut.

As in the past, this iteration includes players who were out for a significant time for an injury, but had enough of a term or service to their respective franchise, with some exception, to warrant returning to the MLB squad.  Most teams will have 12 relievers, though some have 13.  Most teams will have players who had a moderate amount of service time available to swap in, sitting usually on the AAA team.  
 
Fielders speed ratings and the 4 significant fielding attributes all updated.
 
Latest cyberface IDs added to match the latest file released (1B fielders).
 
Simmed successfully with injuries, trades and suspensions OFF.  Results may vary if any or all are on.  Remember crashes can and typically do occur because of other mods.  

Roster includes latest Cyberface ID nos.  
 
I think I caught all of the jersey no. changes.  Minimally, no teams have duplicate nos.
 
Same install instructions, etc. as before.
 
==========
 
Update to Phillies' reliever Falter
 

Updated MVP Defensive Ability Scaling chart.  Tweak to your own liking.

*Some new players created/tuned
*New Cyberface ID nos. integrated
*Out for Season or major injuries reflected (anticipated returns included back to MLB roster)
 
-----------------------------------------
 
Main player update: Adam Engel / CWS
 

Start of 2021 season rosters.  MLB level emphasis only.  See corresponding thread in "Announcements" for more information.  Additional information about these rosters includes:
 
Latest cyberfaces that did not use official IDs do not have the official IDs included here.  If you want to use those faces, then you'll have to manually change the cyberface nos. in the roster (either with MVPedit or in the attrib.dat file itself) AND changes the corresponding nos. on the cyberface files themselves.  If you simply install the cyberfaces with the unofficial nos., they'll change other players' faces.  I did not include them because if changes aren't made correctly, several players will not look correct. Simmed seasons with injuries & suspensions both ON and OFF ---  both WORKED! Presently, Akil Baddoo (DET) is the only player without a portrait ID.  You can always add that in manually or user the editor once assigned. Hot/cold updated zones not included.  Despite finding a good site to do that again, it's just too tedious and might be included in the next release. Jhoulys Chacin moved to COL AAA level in anticipation of signing. Jose Rojas included with LAA MLB roster. All players with very low contact/power nos. were examined and corrected if needed.  A few other players' contact/power nos. were tweaked.  
I will not be doing minor league teams, so please don't ask.  If you're going to do a review/feedback, please do so intelligently.  If you are not seeing the rosters show up correctly, then you are not installing properly (i.e., in the "database" subfolder, DELETE all 19 .dat files and unzip this roster file to that location.  DO NOT SIMPLY OVERWRITE.  If you are presently in a franchise/season, these rosters will not magically show up there.)
 
If you find any discrepancies, typos, tweaks, changes that need to be made (cosmetic reasons, batting stances, swing types, pitch styles), please let me know in a PM or in the announcement thread.  I'm not looking for feedback on ratings (unless you see a blatant problem, which is probably a typo); most ratings are based on charts I developed which correspond to actual players' prominent statistics for the most part.  Thanks.
 
Speaking of thanks ......
Continual thanks to Laroquece for keeping up with the moves throughout the entire year!  He's a big part of this! Philthepat's most recent roster was very helpful in importing new players' basic information -- big time saver! Also to Raidersbball20 who sponsored me on FanGraphs to make using that site much, much easier! And to Omarito2013 for keeping up with all of those ID nos.  Very tedious work! To the other modders who contribute along the way; like Philthepat, Savoy Special's portrait work was mammoth! And of course to Trues and the admins. of the site who keep things moving along and afloat!  Much appreciated!  
*NOTE:  if enough suggestions come in in short time, there's a good chance I'll release an update.  Otherwise, the announcement thread should suffice on making any little tweaks that might be wanted/needed.

Install your preference with TiT.
 
Note: the large "MVP Mods" is a watermark this site puts on the previews.  It is not on the final version.

See this thread for all details:
 
 

In light of the delay of the season and suspension of games, you can use these rosters to set up PC vs. PC games to watch in an exhibition mode.  The set up for this is here:
 
 
One recent change was made to pitcher stamina, since pitch count is difficult/impossible to make realistic without a realistic number of walks.
 
**THIS IS NOT FOR HUMAN VS. PC PLAY.  BATTER RATINGS ARE PURPOSELY DUMBED DOWN.  SO PLEASE DON'T SUBMIT FEEDBACK SAYING THE RATINGS ARE NOT RIGHT.  IT'S DONE THIS WAY ON PURPOSE TO MAKE PC VS. PC PLAY MORE REALISTICALLY.

In light of the delay of the season and suspension of games, I decided to release a relatively up to date roster that I've been keeping up with for my own purposes.  This is not up to the caliber of the BaseUp! rosters I've done before, and I have created some players, though I have not updated any ID numbers and birth dates on new players might not all be correct. 
 
This is put together simply to hold over until other roster makers do what they are going to do for this season.  This is not something I plan on continuing at all.  In fact, any roster makers who want to use whatever they want from this are welcome to do it (e.g., a created player to import to another roster, etc.).
 
These were tested and play on field without crashing as well as when simming an entire season with injuries and suspensions set to OFF.

2 different .ico sizes.  Install as you would any icon for Windows. 
 
NOTE:  The MVPMods watermark is only on this preview image, not on the icon itself.

Sliders for MVP All-Star level (SIMULATION PACK).  See that upload for instructions.

NOTE:  THIS IS AN MLB ONLY ROSTER FOR PC VS PC PLAY ONLY!
 
 
Rosters are adjusted for PC vs PC play only.  If you attempt to play vs. the PC you may not get the same results.  
NOTE:  The ratings for the main batting attributes (contact & power) are purposely lowered to play effectively like this.  Do not contact me about this.
NOTE 2:  You can load these rosters, then save in game, then re-install other preferred rosters.    If you do this, you'll have to then load your save to play PC vs. PC.
 
INSTALLATION:  place this rar file into the database subfolder (where your 19 .dat files are).  DELETE the existing 19 .dat files first.  Then, unzip/rar this file to this location.  DO NOT SIMPLY DO AN OVERWRITE!!
 
You can use this thread re: how to set up the game:  
 
 
**If you're going to give feedback, please make it intelligent. THIS WOULD INCLUDE IF YOU DO NOT KNOW WHAT YOU'RE DOING.  Leave a comment or question in the comments area if you need assistance, not in the feedback area. Thanks.

These are SAV files only, meaning you need to place this in your MVP/documents folder in order to see it in game.  These are the announced line-ups for each team.  These are using the latest BaseUp! EOS rosters Version 5.  Pitchers brought up had adjustments made accordingly.
 
There is a SAV file for each team, depending on who you want to control, Washington or Houston.  The game has set the next starter and I have no control over that, so make sure you pick the matchups you want.

NOTE:  THIS IS AN MLB ONLY ROSTER!
THIS WILL BE MY LAST ROSTER SET -- THERE STILL MIGHT BE ADDITIONAL TWEAKS TO FIX THINGS IF NEEDED
 
* Top of each league's position players contact/power updated
* Several more players created
* Rosters primarily incorporating players giving the most service to their respective organization, or if a prominent player, had the greatest overall service during the year if on multiple teams
* Latest portrait numbers for official faces to show properly
* Contact/Power and Hot/Cold zones updated primarily for younger players
 
**NOTE:  I'll be making a thread in the near future to provide direction to the resources I've used and created to make these rosters over the years.
 
*NOTE:  I cannot guarantee that rosters won't freeze with injuries, suspensions and/or trades on.  I have tried everything I know to combat this and the rosters seem no longer able to handle 25 players/team at the MiLB level.  I have no idea why.
 
Tested successfully via simming an entire season with trades, injuries and suspensions off (by the way, the Dodgers won).  There are a minimum of 23 players on each minor league team, so playing with trades, injuries and/or suspensions "ON" or for MLB only "ON" might work.
 
If you find any mistakes (batting stances, pitching styles, jersey numbers, etc.), please PM me and I'll include the fixes, if warranted, in the next update, or if there are enough I'll upload another version.  If you think a player should be created and placed on the MLB team, PM me and I'll consider it.
 
Since "Placeholder" players (last name) were put in to fill the empty slots, these rosters can be used with injuries and suspensions set to "ON" without crashing.  Most every team has 24 players.  I don't know why at this point, but filling teams to 25 seems to be causing freezes when simming a season/franchise.
 
If you want to use these rosters to create another version or a roster incorporating MiLB, just ask (as someone already has in reference to a standard only roster).  If you are thinking of making a MiLB roster set, you can alter the existing "Placeholder" players.
 
INSTALLATION:  Go to C:\Program Files (x86)\EA SPORTS\MVP 2005 (or whatever you named it)\data\database subfolder.  DELETE the existing 19 .dat files.  Unzip this roster file to that location.  DO NOT SIMPLY OVERWRITE!
 
**If you're going to give feedback, please make it intelligent.  If you don't know what you're doing or you're one of the only few who is having trouble, then don't leave me negative feedback.  Ask questions in the forums after searching for a thread!! Please do not PM me for individual help as there are many threads already out there!  Thanks.

This is a .sav file only, meaning you need to place this in your MVP/documents folder in order to see it in game.  These are the current matchups using the BaseUp! end of season rosters with one major change......
 
Teams pitchers reflect more accurately the pitch types, speeds and trajectories used during the 2019 season (pitch control was done previously).   Of course, playoff rosters are not set as of the release of this, therefore you are playing with rosters that will not reflect those rosters.
 
Initial team controlled is Houston.  You will need to use the Team Changer mod to control another team.  Please don't PM me for support on that.  Go to the forums or check in the downloads if you need that mod.
 
**Note:  Anderson replaces Kittredge for Tampa Bay
 
**Note 2:  Before starting your series, check that DH rule and Energy level options are set the way you want.

NOTE:  THIS IS AN MLB ONLY ROSTER!
 
*Many new pitchers created
*Latest moves completed; injury timelines taken into consideration
*Latest cyberface numbers for official faces to show properly
 
*NOTE:  I cannot guarantee that rosters won't freeze with injuries, suspensions and/or trades on.  I have tried everything I know to combat this and the rosters seem no longer able to handle 25 players/team at the MiLB level.  I have no idea why.
 
Tested successfully via simming an entire season with trades, injuries and suspensions off.
 
If you find any mistakes (batting stances, pitching styles, jersey numbers, etc.), please PM me and I'll include the fixes, if warranted, in the next update, or if there are enough I'll upload another version.  If you think a player should be created and placed on the MLB team, PM me and I'll consider it.
 
Since "Placeholder" players (last name) were put in to fill the empty slots, these rosters can be used with injuries and suspensions set to "ON" without crashing.  Most every team has 24 players.  I don't know why at this point, but filling teams to 25 seems to be causing freezes when simming a season/franchise.
 
If you want to use these rosters to create another version or a roster incorporating MiLB, just ask (as someone already has in reference to a standard only roster).  If you are thinking of making a MiLB roster set, you can alter the existing "Placeholder" players.
 
INSTALLATION:  Go to C:\Program Files (x86)\EA SPORTS\MVP 2005 (or whatever you named it)\data\database subfolder.  DELETE the existing 19 .dat files.  Unzip this roster file to that location.  DO NOT SIMPLY OVERWRITE!
 
**If you're going to give feedback, please make it intelligent.  If you don't know what you're doing or you're one of the only few who is having trouble, then don't leave me negative feedback.  Ask questions in the forums after searching for a thread!! Please do not PM me for individual help as there are many threads already out there!  Thanks.

NOTE:  THIS IS AN MLB ONLY ROSTER!
 
Many more players created.  Younger pitchers' and starters' control attributes updated in accordance with WHIP numbers (for tenured starters, the last 3 years were used).
 
Tested via simming an entire season with trades, injuries and suspensions off.  (Btw, the LA Dodgers won).
 
If you find any mistakes (batting stances, pitching styles, jersey numbers, etc.), please PM me and I'll include the fixes, if warranted, in the next update, or if there are enough I'll upload another version.  If you think a player should be created and placed on the MLB team, PM me and I'll consider it.
 
Since "Placeholder" players (last name) were put in to fill the empty slots, these rosters can be used with injuries and suspensions set to "ON" without crashing.  Most every team has 24 players.  I don't know why at this point, but filling teams to 25 seems to be causing freezes when simming a season/franchise.
 
If you want to use these rosters to create another version or a roster incorporating MiLB, just ask (as someone already has in reference to a standard only roster).  If you are thinking of making a MiLB roster set, you can alter the existing "Placeholder" players.
 
INSTALLATION:  Go to C:\Program Files (x86)\EA SPORTS\MVP 2005 (or whatever you named it)\data\database subfolder.  DELETE the existing 19 .dat files.  Unzip this roster file to that location.  DO NOT SIMPLY OVERWRITE!
 
**If you're going to give feedback, please make it intelligent.  If you don't know what you're doing or you're one of the only few who is having trouble, then don't leave me negative feedback.  Ask questions in the forums after searching for a thread!! Please do not PM me for individual help as there are many threads already out there!  Thanks.
 
 

NOTE:  THIS IS AN MLB ONLY ROSTER!
 
As promised, dozens of younger tenured pitchers' (control) and position players' (contact/power) attributes changed.  A good number of significant debuting players created as well.  Affected some team rankings significantly.
 
If you find any mistakes (batting stances, pitching styles, jersey numbers, etc.), please PM me and I'll include the fixes, if warranted, in the next update, or if there are enough I'll upload another version.  
 
Since "Placeholder" players (last name) were put in to fill the empty slots, these rosters can be used with injuries and suspensions set to "ON" without crashing.  Most every team has 24 players.  I don't know why at this point, but filling teams to 25 seems to be causing freezes when simming a season/franchise.
 
If you want to use these rosters to create another version or a roster incorporating MiLB, just ask (as someone already has in reference to a standard only roster).  If you are thinking of making a MiLB roster set, you can alter the existing "Placeholder" players.
 
INSTALLATION:  Go to C:\Program Files (x86)\EA SPORTS\MVP 2005 (or whatever you named it)\data\database subfolder.  DELETE the existing 19 .dat files.  Unzip this roster file to that location.  DO NOT SIMPLY OVERWRITE!
 
**If you're going to give feedback, please make it intelligent.  If you don't know what you're doing or you're one of the only few who is having trouble, then don't leave me negative feedback.  Ask questions in the forums after searching for a thread!! Please do not PM me for individual help as there are many threads already out there!  Thanks.
 
 

NOTE:  THIS IS AN MLB ONLY ROSTER!
 
A good number of newer players created.  Latest moves made.  Brought players back from the IL in anticipation they will return in June and/or very shortly.
 
If you find any mistakes (batting stances, pitching styles, jersey numbers, etc.), please PM me and I'll include the fixes, if warranted, in the next update, or if there are enough I'll upload another version.  
 
Since "Placeholder" players (last name) were put in to fill the empty slots, these rosters can be used with injuries and suspensions set to "ON" without crashing.  Most every team has 24 players.  I don't know why at this point, but filling teams to 25 seems to be causing freezes when simming a season/franchise.
 
If you want to use these rosters to create another version or a roster incorporating MiLB, just ask (as someone already has in reference to a standard only roster).  If you are thinking of making a MiLB roster set, you can alter the existing "Placeholder" players.
 
INSTALLATION:  Go to C:\Program Files (x86)\EA SPORTS\MVP 2005 (or whatever you named it)\data\database subfolder.  DELETE the existing 19 .dat files.  Unzip this roster file to that location.  DO NOT SIMPLY OVERWRITE!
 
**If you're going to give feedback, please make it intelligent.  If you don't know what you're doing or you're one of the only few who is having trouble, then don't leave me negative feedback.  Ask questions in the comments area or PM me!! Thanks.

NOTE:  THIS IS AN MLB ONLY ROSTER!
 
I've replaced the player IDs for those who don't have any kind of an accurate portrait with the default team portraits I had made previously.  I took those down but reposted them (portraits downloads section).  You may want to install them.  If portraits are made for any of these players, ID nos. can always be easily changed back.
 
Great thanks to Laroquece for his assistance for helping with adjustments and tweaks as well as others who have provided information and suggestions as well.
 
This roster is a culmination of all of the updates done throughout the year including defensive ratings, batting ratings, pitcher styles, types, speed and trajectories, hot/cold zones, player speeds, etc.  Many newer players added/created as best as possible. 
 
If you find any mistakes (batting stances, pitching styles, jersey numbers, etc.), please PM me and I'll include the fixes, if warranted, in the next update, or if there are enough I'll upload another version.  
 
Since "Placeholder" players (last name) were put in to fill the empty slots, these rosters can be used with injuries and suspensions set to "ON" without crashing.  Most every team has 24-25 players. 
 
If you want to use these rosters to create another version or a roster incorporating MiLB, just ask (as someone already has in reference to a standard only roster).  If you are thinking of making a MiLB roster set, you can alter the existing "Placeholder" players.
 
INSTALLATION:  Go to C:\Program Files (x86)\EA SPORTS\MVP 2005 (or whatever you named it)\data\database subfolder.  DELETE the existing 19 .dat files.  Unzip this roster file to that location.  DO NOT SIMPLY OVERWRITE!
 
**If you're going to give feedback, please make it intelligent.  If you don't know what you're doing or you're one of the only few who is having trouble, then don't leave me negative feedback.  Ask questions in the comments area or PM me!! Thanks.

This will install one of 4 generic portraits by position when a portrait is not available or done incorrectly for a player.  Roster will be updated to reflect this.
 
Install with TiT.
 

The large MVPMODS watermark will not be on the final version
 
Install with TiT.

The large MVPMODS watermark will not be on the final version
 
Install with TiT.

This came out a bit busy.  May try a different version later.  
 
The large MVPMODS watermark will not be on the final version
 
Install with TiT.